manualshive.com logo in svg

Fanimation PROP LP8333 Series, Руководство пользователя

Поделиться
Скачать
Fanimation PROP LP8333 Series Скачать руководство пользователя страница 17

17

Periodic light dusting of the blades is recommended.
A feather duster will work best.

Avoid using water, cleansers, or harsh rags, which 
can warp and ruin the blades.

How to Clean Your Ceiling Fan Blades

WARNING

Trouble

Probable Cause

Suggested Remedy

1. Check main and branch circuit fuses or circuit
     breakers.

2. Check line wire connections to fan and switch wire
     connections in the switch housings.

CAUTION: Make sure main power is turned off !

CAUTION: Make sure main power is turned off !

3. Replace with fresh battery.

1. Attach blades to fan before operating.

2. Check to make sure all screws in motor housing 
     are snug (not over-tight).

3. Check to make sure wire connectors in switch 
     housing are not rattling against each other or 
     against the interior wall of the switch housing.

4. Some fan motors are sensitive to signals from 
     solid-state variable speed controls. Solid-state 
     controls are not recommended, choose an 
     alternative control method.

1. Tighten both setscrews securely in downrod support.

2. Tighten the setscrew in the downrod/hanger ball
     assembly.

3. Check to be sure screws which attach the fan blade
     to the motor assembly are tight.

4. Tighten the hanger bracket screws to the outlet box,
     and secure outlet box.

1. If possible, consider using a longer downrod (not
     included, you can buy the longer downrod from
     fanimation.com).

For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan.

1. FAN WILL NOT START.

2. FAN SOUNDS NOISY.

3. FAN WOBBLES
EXCESSIVELY.

5. NOT ENOUGH AIR
MOVEMENT.

4. REMOTE CONTROL
DOES NOT WORK. THE
CONTROL INDICATOR
LED IS CONSTANTLY
FLASHING.

1. Fuse or circuit breaker blown.

2. Loose power line connections to the fan, or loose
     switch wire connections in the switch housing.

3. Dead battery in remote control.

1. Blades not attached to fan.

2. Loose screws in motor housing.

3. Wire connectors inside housing rattling.
    

4. Motor noise caused by solid state variable speed 
     control.

1. Setscrew in downrod support is loose.

1. Please replace the battery/batteries.

1. The battery/batteries are going to run out.

2. Setscrew in downrod/hanger ball assembly is 
     loose.

3. Screws securing fan blade to motor assembly are
     loose.

4. Hanger bracket and/or ceiling outlet box is not
     securely fastened.

Troubleshooting

Содержание PROP LP8333 Series









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды