Fanimation Old Havana Series, Руководство пользователя

Страница: 5 / 17

Hex Bolt
& Washer
Motor
y l b m e s s A
5/16 x 2 ½
Bolt & Washer
Floor / Desk
Base
Floor /
Desk Base
Speed Control
Operating the Floor / Desk
Fan
1. Check the operation of the fan by turning the speed
control to “high”.
2. Your fan model is equipped with a 4-position,
3-speed control. The operating sequence is as
follows:
1
st
position - OFF
2
nd
position - HIGH
3
rd
position - MEDIUM
4
th
position - LOW
1. After removing the Floor/Desk base from the carton,
place it on the floor with the flat surface resting on the
floor. (Fig.13)
Using the Floor / Desk Fan
1. Your fan is now ready to operate.
2. Attach appropriate plug to cord end.
3. Plug the fan into approved 220 volt outlet.
How to Assemble Your Floor / Desk Fan
Fig. 15
9
Fig. 16
Fig. 14
Fig. 13
2. Secure Hex Bolt and washer in Floor / Desk base with
a 5/16 Nylon Nut and Spring Washer. (Fig.14)
3. Position the Motor Assembly onto the Floor / Desk
base. (Fig.14)
4. Secure Motor Assembly and Floor / Desk base with a
bolt and washer. (Fig.14)
5. Tighten with adjustable wrench. Do not over tighten.
5/16 Spring Washer
5/16 Nylon Nut