How to Assemble Your Pedestal Fan
1. Assemble Column to floor base using 15/16
˝
-18 x 1½
˝
bolt and washer (Fig. 18). Do not overtighten.
2. After you assembly the column to the floor base, you
will proceed to mounting your Motor Assembly to the
column.
3. Secure the Hex Bolt and washer into the top of the
column.
4. Position the Motor Assembly onto the Column.
5. Secure the Motor Assembly with a 5/16-18 x 2½
˝
bolt
and washer. Tighten with an adjustable wrench. Do not
overtighten.
Using the Ped es tal Fan
1. Your fan is now ready to operate.
2. Plug the fan into a U.L. approved 120 volt outlet.
Operating the Ped es tal Fan
1. Check the operation of the fan by turning the speed
control to “high”.
2. Your fan model is equipped with a 4-position, 3-speed
control. The operating sequence is as follows:
1
st
position - OFF
2
nd
position - HIGH
3
rd
position - MEDIUM
4
th
position - LOW
Floor Base
5/16
˝
-18 x 1½
˝
Bolt & Washer
Column
Floor Base
Motor
Assembly
Fig. 18
Fig. 19
Fig. 20
Hex Bolt
& Washer
5/16
˝
x 2½
˝
Bolt & Washer
11
Fig. 21
Speed
Control
