5
Wall Mount Instructions
Figure 6
Figure 7
Figure 2
Figure 1
Figure 5
Figure 3A
Allen Wrench
1˝ Nail
Figure 4
Figure 3B
Mounting Fan On Wall Within 6ft Of Outlet
1.
Remove & discard the Cord Retainer from the base.
(Figure 1)
2.
Mount Retaining Bracket with two screws provided.
(Figure 2)
3.
Locate & mount the
W
all Mount Bracket on the wall
within 6 feet (or less) of an outlet. Mount with proper wall
mounting hardware (not supplied). (Figure 3A)
4.
Carefully break off the thin area in the lower part of the
base. Route the cord under the base and down the wall t
o
an outlet. (Figure 3B)
5.
Hang the fan by inserting the four hooks through the
holes in the bottom of the base and sliding the fan down
until it is pulled snug-tight against the wall. (Figure 3A)
6.
Secure the assembled Retaining Bracket / base with
the 1 inch nail provided. (Figure 4)
7.
Remove the cap rubbers and the socket head cap
screws with flat washers by allen wrench before rotating
the fan head back to a desired head angle. Attach both
screws and cap rubbers into threaded holes in fan head
mount. (Figure 5)
8.
Plug cord directly into the socket. (Figure 6)
9.
Select the desired airflow, located on fan base by
rotating switch clockwise. (Figure 7)
Socket head cap
screw with flat
washer
Cap Rubber