How to Assemble Your Switch Cup Assembly (Continued)
How to Operate Your Ceiling Fan
2.
Securely attach the 9-pin switch cup connector to
the wiring harness socket within the adapter
assembly. (Figure 2)
3.
Assemble the switch cup assembly onto the
housing adapter with previously removed screws.
(Figure 3)
1.
Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 1)
2.
Install the fan fob and pull chain coupler. (Figure 2)
3.
Check the operation of the fan by gently pulling on
the fan fob. (Figure 3)
Switch Cup
Assembly
WARNING
The color label on these two connectors must
correspond to each other.
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan damage
could result.
Main Fuse Box
Fan Fob
Pull Chain
Coupler
Fan Pull Chain Operating Sequence
1
st
Pull
High
2
nd
Pull
Medium
3
rd
Pull
Low
4
th
Pull
Off
15
Figure 2
Figure 3
Figure 1
Figure 2
Figure 3
Fan Fob
X 1
Pull Chain Coupler
X 1
HARDWARE USED:
