Fanimation Cancun FP8009OB-220, Руководство пользователя, Страница: 9 / 16

9
Housing/Adapter Switch Cup Assembly
1. Disassemble the housing adapter switch cup assembly
by removing three screws. (Figure 18)
Figure 18
HOUSING/ADAPTER
SWITCH CUP
2. Remove one of the three screws in the support
bracket. Slightly loosen the remaining two screws.
Assemble the adapter assembly to the housing support
bracket using the two key slots in the adapter assembly.
Replace the third screw and securely tighten all three
screws. (Figure 19)
Figure 19
SCREWS (3)
ADAPTER
ASSEMBLY
3a. Securely attach the 9-pin switch cup connector to
the wiring harness socket within the adapter assembly.
(Figure 20a)
Figure 20a
ADAPTER
ASSEMBLY
3b.
<<FP8011OB-220 ONLY>>
Connect the
2-pin connector from the switch cup housing light
fitter
to the 2-pin connector from the motor assembly.
(Figure 20b)
Figure 20b
4. Install the housing switch cup onto the assembled
adapter with the three screws removed in step 1.
(Figure 21)
Figure 21
FP8009OB-220 FP80011OB-220
FP8009OB-220 FP80011OB-220
HOUSING/ADAPTER
SWITCH CUP
WITH LIGHT FITTER