3
Unpacking Instructions
For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all
steps have been completed and will be helpful in finding your place should you be interrupted.
NOTE: If you are uncertain of part description, refer to
exploded view illustration.
1.
Check to see that you have received the following
parts:
Fan Motor Assembly
•
Hanger Bracket Assembly
•
Downrod/Hanger Ball
•
Assembly
Ceiling Canopy
•
Canopy Screw Cover Assembly
•
Motor Coupling Cover Assembly
•
Blade Holder Set
•
Switch Cup Assembly (FP6244**)
•
Light Kit Assembly (FP6245**)
•
Blade Set
•
Glass (FP6245**)
•
Bulbs (FP6245**)
•
WARNING
Do not install or use fan if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not
designated for use with this product by Fanimation could
result in personal injury or property damage. Contact
your retail store for missing or damaged parts.
Switch Cup Assembly
(FP6244**)
Light Kit Assembly
(FP6245**)
Glass (FP6245**)
ardware ags:
1/4˝-20 pan head screws
(blade holder to fan motor hub)
–
3/16˝-24 washer head screws
(blade to blade holder)
–
Fiber Washer
–
–
our ire Connectors
–
alance it
10˝ Pull Chain with Chain Coupler
(FP6245**)
–
with lock washers
Hardware Bags
Ceiling Canopy
Hanger Bracket
Assembly
Downrod/
Hanger Ball Assembly
Fan Motor Assembly
Blade Holder Set
Bulbs
(FP6245**)
Blade Set
Motor Coupling
Cover Assembly
Canopy Screw
Cover Assembly
This manual is designed to make it as easy as possible for you to assemble,
install, operate and maintain your ceiling fan
Tools Needed for Assembly
•
ne hillips head screwdriver
•
One stepladder
•
hree wire connectors supplied
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 9
)
. If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
WARNING
!
•
One wire stripper
•
One
lade
screwdriver
nstalled
ire ength
ire i e
p to
ft
ft
Materials
iring outlet o and o connectors ust e of type
re uired y the local code he ini u wire would e a
conductor
wire with ground of the following si e:
NOTE:
Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing contact your local retailer.
Fan Chain Coupler
(FP6244** & FP6245**)
–
Light Kit Chain Coupler
(FP6245**)
–
