Fanfare FM FT-1 Скачать руководство пользователя страница 14

LIMITED WARRANTY

FANFARE Electronics, Ltd., herein referred to as  "FANFARE",  guarantees this product to be free of defect in both material and  workmanship and agrees to remedy any such defect or
to replace any defective component at no charge for a period of three years from date of sale to the first end user. Should such  a defect be discovered and its remedy is deemed by
FANFARE to be covered under the terms of this guarantee, FANFARE will correct the defect in workmanship and/or replace any defec tive component with a serviceable component of
similar capability and value. 

This warranty is void if the product has been found to be subjected to misuse, abusive treatment, lightning strike or  unauthorized service. This warranty is also void if the unit has
been damaged in transit or has been altered or repaired in such a way so as to detract from its performance, its reliability or  its safe operation.  This warranty does not apply to the
cabinet, the remote controller or appearance items such as the faceplate, control buttons or display lenses; nor does it cover any expenses incurred in shipping the unit to and from
the FANFARE  service depot. 

The foregoing is in lieu of any other warranties expressed, implied or statutory and FANFARE neither assumes nor authorizes any person to assume for it any other obligation or
liability in connection with the sale of this product. This warranty is not transferable  or extendible except by written  authorization from FANFARE.  In order to qualify for
transferability, the product must  be registered with FANFARE within 30 days of the selling date by returning the enclosed Warra nty Registration Card.

Defective units must be returned to the selling dealer. In the event the selling dealer is not readily available, the unit may b e returned to FANFARE at the address below. In order to
qualify under the terms of the above warranty, all items must be returned, adequately insured and  with all shipping charges pre paid. FANFARE reserves the right to charge the return
shipping costs to the sender  if no defect is found in the alleged defective unit. In lieu of having previously registered the purchase of the unit by completing and returning the
attached Warranty Registration Card, the unit must be accompanied by proof of purchase (bill of sale) from an  authorized FANFARE  dealer.

Before returning the product, a Return Authorization number must first be obtained from FANFARE . However, FANFARE  does not assume nor does it accept any liability whatsoever
in respect of any product, FANFARE or otherwise, being returned to FANFARE  for any reason. Product arriving at FANFARE's service depot without a valid Return Authorization
number showing prominently on the shipping container will be refused.

This warranty provides you with specific legal rights. You may also have other rights which vary from State to State. However, no  warranty, implied or otherwise created by State
law, shall extend beyond the term of this warranty and FANFARE FM shall not be liable for any incidental or consequential damage  arising out of a defect in material or workmanship
of the unit during the term of this warranty or thereafter. Some States do not allow the exclusion or limitation of incidental or consequential damages and the foregoing exclusions

may not apply to you. 

  

                                                         Electronics, Ltd.      

 2100 Old Union Road,  Buffalo  NY  14227   

   (905)793-7953      FAX  (905)793-5984

NOTE:   

IN

 

ALL

 

COUNTRIES

OTHER

 

THAN

 

THE

 U.S.A., 

DEFECTIVE

 

UNITS

 

MUST

 

BE

 

RETURNED

 

TO

 

THE

 

SELLING

 

DEALER

.

My FT-1 serial number is ______________The selling Dealer is  ___________________________________Date of Purchase __________

Sold to  ____________________    Address ____________________________________________Date  _________________    

          

 

SPECIFICATIONS

Page 13

Usable sensitivity - mono                                      < 10.5dBf
Usable sensitivity - stereo   

<11.5dBf

Sensitivity for 50dB quieting - mono 

<15.0dBf

Sensitivity for 50dB quieting - stereo                     < 32.0dBf 
Audio frequency response (±1.5dB)     

30Hz - 15KHz

Capture ratio

1.5dB

Alternate Channel Selectivity - wide

55dB

Alternate Channel Selectivity - narrow                           75dB
Adjacent Channel Selectivity - wide              

10dB

Adjacent Channel Selectivity - narrow                            25dB

Tuning range (50KHz steps)

87.5 - 108.5MHz

Signal-to-Noise Ratio(SNR) (A-weighted)

       75dB

Total Harmonic Distortion - mono                 

0.15%

Total Harmonic Distortion - stereo

                0.30%

Stereo Separation  (1Khz)                                 

40dB

AM suppression

 -70dB

SCA suppression

-70dB

Power required

120/220/240 VAC* @ 50 watts

Dimensions                      

19.0"(w) x 10.25"(d) x 3.5"(h)

 "         '   

483mm(w) x 260mm(d) x 89mm(h)

Weight       16lb.(7.3 Kg)

Содержание FT-1






















Отзывы: