How To Assemble:
Step 1:
Assemble the stand with the base as shown using the
included 4 screws.
Step 3:
With the thumbscrew loosened, pull out the chrome
extension pole.
Step 5:
Assemble rear grill onto motor housing. Make sure to fit
the pins into the holes of the grill as shown.
Step 7:
Remove any protective covering on the shaft before
installing the fan blades. Make sure that the pin on the
shaft fits into the fan blades.
Step 9:
Attach front grill to the rear grill with the hook on the
top of the front grill.
Step 2:
Place the decorative cover as shown. You may need to
remove the thumbscrew.
Step 4:
Assemble fan control panel/motor onto the chrome
extension pole and tighten the collar nut.
Step 6:
Thread locknut onto motor housing to lock the rear grill
into place.
Step 8:
Screw the blade cap into place. Note that you will have
to turn counter-clockwise.
Step 10:
Press the grill clips into place. Do not operate the fan
before doing so.
