Fanelite R1-T, Руководство пользователя, инструкция по установке и эксплуатации

Страница: 15 / 18

15
Loosen the fan head mounting screw on the back of the control panel (9) by turning it
counterclockwise, install the motor block (7) and control panel (9) on the extensible tube (11)
and carefully tighten the screw clockwise.
Place the rear grille (6) on the motor block (7) by taking care to align the notches in the grille
and then tighten the locking nut on the rear grille (5) clockwise.
Place the blade (4) on the axis of the motor block (7) by taking care to align the slot of the
blade with the pin of the shaft and insert the blade until it locks in place.
Then tighten the blade locking nut (3) by turning it counterclockwise. Take care to tighten the
nut properly. Check that the blade rotates well by turning it manually.
Place the front grille (1) on the rear grille (6) and assemble the grilles using the grilles locking
ring (2) by tightening the nut and the ring screw. Take care to tighten the screw properly for
optimum safety.
5. OPERATING INSTRUCTIONS
WARNING : Before using your appliance, carefully read the safety instructions in this
manual.
Description of the control panel
1. Timer and temperature indicator
2. Normal mode indicator
3. Natural mode indicator
4. Sleep mode indicator
5. Timer indicator
6. Low speed indicator
7. Medium speed indicator
8. High speed indicator
9. Mode setting button
10. Timer setting button
11. Speed setting button
12. ON/OFF button
Description of the remote control
ON/OFF button
Mode setting button
Timer setting button
Speed setting button
Plug in the power cord. The appliance beeps. Using the control panel or the remote control :
ON/OFF
Press the ON/OFF button to turn on and turn off the fan. The fan starts at low speed. The low
speed indicator, the operation mode indicator and the ambient temperature indicator light up.
Speed