Fanelite FW40-DC, Руководство пользователя

Страница: 16 / 20

16
1. Guards assembly circle 2. Front guard
3. Blade’s locking nut 4. Blade
5. Lock ring of rear guard 6. Rear guard
7. Motor block 8. Wall mounting bracket
4. ASSEMBLY
WARNING : Before assembling your appliance, carefully read the safety instructions
in this manual.
1. Remove from the motor block (7) the blade’s locking nut (3) by turning it clockwise and
the rear guard locking ring (5) by turning it counter-clockwise.
2. Place the rear guard (6) onto the motor block (7) by aligning the knobs of the motor block
with the holes on the rear guard (rear guard arrows upwards).
3. Replace and screw the rear guard locking ring (5) onto the motor block (7) to secure the
rear guard assembly ; turn clockwise. Be sure to tighten the ring properly.
4. Insert the blade (4) onto the shaft of the motor block (7) until it stops (motor shaft locking
pin in the hollow of the blade). Place and tighten the blade's locking nut (3) ; turn
counterclockwise. Take care to tighten the nut properly. Check that the blade turns well by
turning it manually.
5. Correctly position the front guard (2) on the rear guard (6) (arrow of the front guard
upwards; the 3 holes of the safety screws of the guards aligned). Assemble the two guards
using the locking clips then insert and tighten the 3 screws provided via the rear guard to
secure the assembly of the 2 guards.
5. WALL MOUNTING
WARNING : Before fixing your appliance, carefully read the safety instructions in this
manual. The fixing must be made securely in the wall STRUCTURE by a qualified
person. We can not be held liable in the event of a fall of the appliance.
1. Consider the length of the power cord required, head tilt, activation of the oscillating mode,
relative to the location of the electrical outlet, the cable should never be tense. The fan must
be installed with a minimum distance of 230 cm between the floor and blade.
2. Fix the wall bracket to the wall using the supplied screws.
Depending on the structure of
your wall, use appropriate screws and dowels.
3. Take the fan and install it on the wall bracket (wall bracket into the hole at the back of the
fan).
6. OPERATING INSTRUCTIONS
WARNING : Before using your appliance, carefully read the safety instructions in this
manual.