A
installation and removal of fixed knob (Before the installed or
removed studio panel lights please set the power switch to OFF.)
Installing
1. As the figure: Mount the studio panel lights on light stand and tighten the fastening
at direction of the arrow knob clockwise.
2. Adjust the studio panel lights to the desired direction and angle.
3. Fixed in the insurance rope to where studio panel lights to be ensure stable and
secure.
Removing
1. Discharge Insurance rope
2. Along the arrow in the opposite direction ,rotate
fastening knob counterclockwise, to release.
After use
1.Please set the power switch to “OFF”
2.When not in use,please remove the battery and then bring the light stored in boxes.
3.Make sure the light has cooled down before storing it.
Note
Be sure to guarantee insurance rope fixed in a stable,
solid objects, to avoid the unnecessary risk of falling
loose and property losses.
-4-