Use dry soft cloth to clean photographic lights. You can wash with a cloth slightly
some neutral detergent to remove difficult to remove the dirt, and then with a soft
cloth to dry.
Do not use strong cleaning agents, such as thinner, gasoline or alcohol, as these
solvents may damage the surface of the protective layer
The device can be installed in the camera lights for photography.
Can only be used for general-purpose interface of the camera.
Photography lights ON / OFF can be controlled in the standby mode.
Features
Working Voltage
Average Life time
Illuminance (LX)
Color rendering
Volume(mm)
Notes
Specifications
Notes on the clean
12V
4000 h
800
≥80%
70 x 105 x 74mm
Watt loss
Color temperature (K)
Illumination angle
Net weight(g)
35W
20-100%
3000K
60
310
-2-
1. Never block the ventilation grille by covering it with
paper or clothes. could result in injury.
2. Do not expose the equipment to moisture. or it could
Short circuit result in injury.
3. After use,keep the plug and the source separation.
4. Please use F&V recommended genuine battery adapter,
We can not guarantee that you use other brands of batteries
and adapters to get the best results
Dimming range
(D type)
Standard Package contains:
Design and specifications subject to change without notice.
Battery requirements: 12V Ni-MH battery, 12 lead-acid batteries or 12V adapter.
1. PRO150D lamp holder one piece
2. 12V5AH lead-acid batteries battery one piece 3. Battery belt-bag one piece
4. 1A battery charger one piece. 5. Instruction manual.
