Volume
You can set the desired volume with the “” & “VOLUME-” buttons.
Listening to the Radio
1. Select the RADIO mode with the “
FUNCTION” button
.
2. For FM reception: Completely extend the telescopic antenna. Change its position to improve the reception.
3. There are two options to search for and preset radio stations.
• Automatic scan:
Important! Any preset radio stations will be overridden.
Press and hold the "AMS / MODE" button for approx.3 seconds. The system scans the entire frequency band for radio
stations. Any stations found will be preset from lowest to highest frequency.
•Manual scan for audio stations:
Briefly press the “SKIP+ / ” & “SKIP- / TUNING-” buttons, until you have found the radio station which you
are looking for. If you keep one of the buttons pressed down, the device will search to the previous, respectively next
radio station.
Preset station:
1. Press and hold the "AMS / MODE" button on unit for about 2-3 seconds to start the automatic preset process.
2. Display will show the memory sequence number and radio stations will be automatically preset into the sequence
number (Note: Each sequence number means 1 preset station while during automatic preset process.)
3. Once all the stations were automatic preset, press the “PRE.+ / ” or “PRE.- / FOLDER- “ buttons to
choose preset stations.
Playing CDs/MP3
1. Select the CD mode with the “
FUNCTION” button
.
2. Open the CD compartment by pulling the lid upwards by the tab.
3. Insert an audio CD with the printed side facing upwards on to the central cone so that the CD clicks into place and
then close the lid of the CD compartment.
4. After a few seconds the total number of songs/tracks is shown in the display.
NOTE:
In the case of CDs in MP3 format the number of foldersis briefly displayed at first.
5. The CD will play from the first title.
6. In order to remove a CD, please press the STOP button, open the CD compartment and lift the CD out carefully.
Always keep the CD deck closed.
NOTE:
•if a disc is inserted the wrong way around, respectively if no disc is inserted, then the message “NO “ appears on the
display.
• Playback of CDs produced by the user cannot be guaranteed due to the large variety of software and CD media
available.