Page:6/18
6
III. Control Setting
1. Control panel operation instructions
1
）
operation interface
：
1.
Power Key 2. Mode Selection Key 3. Sleep Key 4. Down Key
5. Up Key 6.Fan Speed Selection Key 7. Timer Key
When the machine is powered on for the first time,
the buzzer will shout
, and then the machine will get
into standby status.
1: Power Key
: press the key to turn on and turn off the machine. In the case of power on, press the
key to turn off the machine; in the case of power off, press the key to turn on the machine.
2: Mode Selection Key
: In the case of power on, press the key to switch between cooling →
dehumidification →fan → heating → cooling → ... mode.
4, 5:
Up Key and Down Key
: press the two keys to change the setting temperature or setting time,
operate as follows:
While setting temperature, press up key or down key to select the required temperature (not available
in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
6:
Wind Speed Selection Key:
In cooling
、
Heating and fan mode, press the key to select high, low wind speed operation. But limited
by anti-cold conditions, under certain conditions, it may not run according to the set wind speed.
In dehumidifying mode, pressing the key is invalid, and the fan will forcibly choose low wind speed
operation.
7:
Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press the key to open
timing.
Press the key, when the timing symbol flashes, press up and down key to select the required timing
排 热 管 组 件
件
Exhaust Pipe Assembly
Window Sealing Plate Assembly
