6
1.POWER
2.AV/TV
3.VOL-
4.TV/RADIO
5.FAV
6.EPG
7.OK/CH+/CH-/VOL-/VOL+
8.MENU
9.PAUSE
10.PLAY
11.<0>-<9>
12.TTX
13.POWER
14.SET
15.VOL+
16.MUTE
17.AUDIO
18.INFO
19.EXIT
20.REW
21.STOP
22.FWD
23.REC
24.SUBTITLE
Programming the remote control
The decoder's remote control has 4 programmable keys via learning mode.
For each of these keys, you can copy the functions in some buttons on the TV remote control.
1.
Close the TV remote control to duplicate by aligning the IR transmitters about 3 cm away.
2.
Press and hold the SET button (TV SETUP section), the remote control LED will turn red intensely,
indicating the input in the learning mode.
3. Press the POWER button in the TV CONTROL section, the red LED will start blinking.
4. Press the POWER button on the TV remote control within 3 seconds, the LED flashes twice to confirm
its programming.
5. Repeat steps 3 and 4 for the other keys to duplicate (TV / AV, VOL-, VOL +)
Press SET to exit the learning mode.
Caution: Some functions are required to enter a password. The factory default password is
‘
000000
’
.
Remote Control
