- 1 -
LOCATION OF CONTROLS
1
USB Port
11
COLOR Button
2
SD Card Slot
12
PLAY/PAUSE
[
/
]
/ MEM Button
3 Display
13
Button
4 Speaker
14 SNOOZE/SLEEP
Button
5 SKIP
DN
[
]
/ TUN- Button
15
VOLUME- Button
6
AL 1 Button
16
Battery Compartment
7
FUNC./CL.ADJ Button
17
DC In Jack
8
POWER/AL.OFF Button
18
Aux-In Jack
9 SKIP
UP
[
]
/ TUN+ Button
19
FM Antenna
10 AL2
Button
- 2 -
CONNECTING THE UNIT TO POWER
Plug one end of the AC/DC adaptor into the DC-In jack, and then plug the other end into AC wall outlet.
Before switching on the unit, make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate.
BACK-UP BATTERY
Open the battery door located at the bottom of the unit, insert 2 pcs. ‘AA’ size (UM-3) batteries with
battery polarities same as shown inside the battery compartment.
In case of AC power outage or interrupted AC power, the current time, alarm time settings and the
stored radio stations are preserved in the memory of the unit.
Important
: When the unit is not use for a week or more and also the unit is not connect to AC power
during that time, please remove the battery to avoid damage to the set from leakage of battery.
SETTING THE TIME
Before starting to set the time, make sure that the unit is in POWER OFF Mode.
1.
Press and hold the FUNC/CL ADJ button for a few seconds, the hour digit in the display will start
flashing.
2. Press
the
/ TUN+ Button to adjust the hour
3. Press
the
/ TUN- Button to adjust the minute...
4.
When the correct time selected, press the FUNC / CL.ADJ button again to store the time in the
memory.
SETTING THE ALARM TIME
Before starting to set the alarm time, make sure that the unit is in POWER OFF mode.
1.
Press the AL1 or AL2 button once and the AL1 or AL2 icon will appear in the display.
2. Press
the
/ TUN+ button to adjust the alarm hour
3. Press
the
/ TUN- button to adjust the alarm minute.
4.
Press the AL1 or AL2 button to select the alarm wake up source.
5.
The options are buzzer
and music (radio or USB/SD)
.
6.
After the wake up source is selected, stop pressing the AL1 or AL2 button for a few second, the unit
will store the wake up source in the memory.
7.
The alarm music source (radio or USB/SD) is based on last source mode before the unit turned off.
Note :
If you choose the alarm music as wake up source, please don’t let the AUX-IN be the last source
mode before turned off the unit, otherwise there will be no alarm wake up sound when alarm
activate.
If you choose USB/SD as the alarm music wake up source, please make sure that a device with
MP3 files is connected to the USB port or SD card reader.
TURN OFF THE ALARM
