background image

- 1 -

WZE-1

Electricity consumption 

meter, single-phase

Directive MID 

2014/32/EU

Certificate number 

TCM 221/12-4971

The WZE-1 is a static (electronic) calibrated single-phase AC elec-

tricity consumption meter in a direct system.

Under the influence of the flowing current and applied voltage, 

a special electronic system generates impulses in a quantity pro-

portional to the electricity consumed. Power consumption is in-

dicated by a flashing LED. The number of pulses is converted into 

energy consumed and its value is indicated on a segmented LCD.

Decimal digits indicate the hundredth of kWh (0.01 kWh = 10 

Wh).

Compliance

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Содержание WZE-1









Отзывы: