By buttons
.
+/
−
set to minutes and enter OK.
7.4 Timer pass to of setting mode of minutes of geografical lenhgt
coordinates.
7.1 Pass to handiwork setting mode of geografical coordinates is
previoused by pass of CONFIGURATION MODE (see p5). In setting
mode of COORDINATES CODE set to code of number 86 (USER
COORDINATES) and enter OK.Timer pass to setting mode of
geografical coordinates
ATTENTION!
Standarts setting coordinates for Warsaw (52°15'N 21°00'E)
7.2 Timer pass to setting mode of width minutes (sign
L
on the left
).
7. HANDIWORK SETTING GEOGRAFICAL COORDINATES
By b/
−
set to value and enter OK..
7.3 Timer pass to of setting mode of geografical coordinates.
l
i5
PROG
Mo T
U
W
E
T
H
F
R
PROG
Mo T
U
W
E
T
H
F
R
ş
ATTENTION!
Value up than “zero” mean north of geografical
coordinates.
Value down than “zero” mean south geografical
coordinates .
width
width
PROG
Mo T
U
W
E
T
H
F
R
S
A
By buttons +/
−
set to minutes and enter OK..
7.5 Z
coordinates..
Timer pass to of setting mode of minutes of geografical lenght
By buttons
Timer pass to setting mode of HOUR SLIP (see p5.4).
+/
−
set to value and enter OK.
PROG
Mo T
U
W
E
T
H
F
R
S
A
ATTENTION!
Value up than “zero” mean east of geografical lenght coordinates.
Value down than “zero” mean west of geografical lenght coordinates
If you want to delete all settings of DATE, TIME and CONFIGURATION
you must together preesing a buttons MENU and
−
for >3sec.
9. RESET
Restart od procesor is needed when all function of timer are to stoped.
Don’t delete settings of DATE, TIME and CONFIGURATION MODE
from memories. Prees a button RESET for <1sec.
8. DELETED MEMORIES - "hard” reset
PEEP TO A DATE
In
AUTOMATIC WORK
prees a button
+
.
Timer displaing a set date
(dd-mm-yy). After 5 sec timer automaticly pass to central level.
AUTOMATIC FUNCTION OF TIME CHANGE !
Changes time from winter time to summer time is autmaticly make at
the last sunday of march at 2 a.m. ( add 1 hour to actual time) .
ATTENTION!
Possible is take OFF automatic function of time change
(see p.4).
PROGRAMMABLE POINTS
ASTRONOMICAL POINT SUNSET
SUNRISE
HOUR SLIP
TIME CORRECTION ENCLOSURE
EXCLUSION
ENCLOSURE
EXCLUSION
21:19
-15min
-02
00
+01
+20min
4:01
1:19
18:19
19:59
3:16
20:19
3:01
Example table with enclosure and exclusion points
on 22.06.2006
for choosen settings of CONFIGURATION
PEEP TO A
AND EXCLUSION
PROGRAMMABLE POINT OF ENCLOSURE
In
AUTOMATIC WORK
mode
next preeser a button
OK.
see a next
seetings in configuration:
- programmable point of enclosure foe channel 1
- start of night break P1
- end of night break P1
- programmable point of exclusion for channel 1
- programmable point of exclusion for channel 2
- start of night break P2
- end of night break P2
- programmable point of exclusion for channel 2
After 5 sec. timer automaticly pass t o central level
