background image

- 1 -

OM-633

Power consumption limiters 

with a voltage relay function

The OM-633 power consumption limiter is designed for au-

tomatic disconnection of the power supply of the electrical 

installation circuit in case of exceeding the set value of power 

consumed by the receivers in this circuit as well as for monito-

ring the power supply voltage of this receiver and protecting it 

against the effects of voltage increase or decrease beyond the 

set values.

»

Adjustable threshold of tripping power 1÷10 kW;

»

Protection against the drop of UL power supply voltage 

(150÷210 V);

»

Protection against the rise of UL power supply voltage 

(230÷260 V);

»

Counter of relay actuations with automatic disconnection 

of system power supply after exceeding a set number of 

actuations;

Purpose

Features

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of char-

ge  and  can  give  any  amount  to  up  to  that  end  point  of  collec� on,  as  well  as 

to store the occasion of the purchase of new equipment (in accordance with 

the principle of old-for-new, regardless of brand). Electro thrown in the tra-

sh or abandoned in nature, pose a threat to the environment and human health.

Содержание OM-633









Отзывы: