- 4 -
Due to the nature of transmission and retransmission it is not recommended
to use the same button on the transmitter more often than every 2 seconds.
Switching the receiver may occur with a slight delay.
It is not recommended to use remote bi-stable transmitters to control a group
of receivers due to the risk of the switching status desynchronization (especially
when working with larger distances and/or simultaneous use of the local but-
tons on the receivers).
Remove the frame by prying it gently with a flat tool in the
cut dedicated to this purpose.
Fold up the buttons.
Move the switch lever from position S1 to ON (for the first
button) and/or move the switch lever from position S3 to
OFF (for the third button).
Close the buttons and then set up the frame with notch facing up.
To do this:
It is possible to change the configuration of the first S1 button to the ON func-
tion and to change the configuration of the third S3 button to the OFF function.
Button configuration
