F&F FW-RC4-AC, Руководство пользователя, Страница: 5 / 6

- 5 -
Due to the nature of transmission and retransmission it is not recommended
to use the same button on the transmitter more often than every 2 seconds.
Switching the receiver may occur with a slight delay.
It is not recommended to use remote bi-stable transmitters to control a group
of receivers due to the risk of the switching status desynchronization (especially
when working with larger distances and/or simultaneous use of the local but-
tons on the receivers).
You can change the configuration of the S1 input to ON and the configuration of
the S2 input to OFF. To do this, select the adequate mode using the dial located
on the housing of the module, according to the attached table.
Mode Input
A S1 S2 S3 S4
B ON S2 S3 S4
C S1 OFF S3 S4
D ON OFF S3 S4
Button configuration
F&Wave system devices
Transmitters Receivers Ø60 box DIN rail
flush-mounted Single relay FW-R1P FW-R1D
FW-RC4-AC, FW-RC5 Double relay FW-R2P FW-R2D
remote controls Universal dimmer FW-D1P FW-D1D
FW-RC4, FW-RC10 Roller blind controller FW-STR1P FW-STR1D
wall buttons Dual-channel LED controller FW-LED2P FW-LED2D
FW-WS1, FW-WS2, FW-WS3