- 2 -
Two-channel LED controller 12 V DC;
Cooperation with remote control transmitters of the F&Wave system;
The ability to control from up to 8 transmitters;
Two local control inputs - the ability to directly control the lighting using any mono-
stable buttons (for example: bell buttons);
Możliwość sterowania paskami LED 12V, ściemnialnymi żarówkami LED 12V;
Soft start - smooth lighting switching (on/off);
Compact enclosure - takes only one field in the switchboard;
Retransmission of commands from the transmitter - the ability to increase the
range of the remote control;
Low power consumption - low operating cost;
Built-in electronic thermal protection to prevent damage in case of excessive load
of the dimmer.
Installation of this device should be carried out by a qualified installer
after reading this manual. Dismantling the casing of the device will au-
tomatically void the warranty. Before starting the assembly, make sure
that the connecting wires are not live. Conditions of storage, transport
and use affect the proper operation of the device.
Features of the module
