F&F DR-30M, Руководство пользователя

Страница: 5 / 15

- 5 -
Brightness level setting
1
Without pressing
a button
<10 lx
1 press 50 lx
2 presses 150 lx
3 presses
2000 lx
(last setting – the indicator light will flash twi-
ce quickly, the setting will be saved and the
detector will exit the configuration mode)
Detection range setting
2
Without pressing
a button
10 m
1 press 15 m
2 presses 20 m
3 presses
30 m max
(last setting – the indicator light will flash twi-
ce quickly, the setting will be saved and the
detector will exit the configuration mode)
1 The sensor will switch on the lighting if the brightness level measured by
it is lower than the value set here.
2 The range setting is for wall mounting only and is indicative. The actual
value will depend on the installation method and ambient temperature,
among other factors. The detection range for ceiling mounting depends
on the installation height, according to the figure on page 6.