- 4 -
When protecting DC circuits, the polarity of connection is
important.
In case of improper connection, the blown fuse indication
will not work.
protection
ø5×20 mm fuse-link
voltage (depending on the fuse-link used)
max 250 V AC/DC
current
max 6.3 A
terminal
wire
2.5 mm² screw terminals
cord with HI type end
2.5 mm² screw terminals
tightening torque
0.4 Nm
working temperature
-25÷50°C
dimensions
1 module (18 mm)
mounting
on TH-35 rail
ingress protection
IP20
The F&F products are covered by a warranty of the 24 months from
the date of purchase. Effective only with proof of purchase.
Contact your dealer or directly with us.
F&F Filipowski sp. j. declares that the device is in conformity with the
essential requirements of The Low Voltage Directive (LVD) 2014/35/EU
and the Electromagnetic Compatibility (EMC) Directive 2014/30/UE.
The CE Declaration of Conformity, along with the references to the
standards in relation to which conformity is declared, can be found at
www.fif.com.pl on the product page.
Technical data
Warranty
CE declaration
E221011
