background image

8.

Please try carding on your new drum carder, before doing any adjustments.  It 
is pre-adjusted for optimum performance at the manufacturer and should 
require no further adjustment.

If you wish to re-adjust your carder please follow the procedure below:

Using a Phillips screwdriver loosen the four slider hold down screws as shown in figure 
A.

Figure A

After you have loosened the screws, move the 

swift forward (closer) or rearward (further away) from the licker-in as you wish.  It is 
easier to move one side at a time and then snug one screw on that side until you get the 
required results.

When you are satisfied with the adjustment, re-tighten all four adjustment screws.

Caution….Caution…Caution

There is a break in period on all carding cloth where a small amount of 
metallic dust may be deposited on your fiber.  We would like to suggest the 
first couple of batts you card should be of a dark or gray color fiber, and not a
bright white.

After a the first couple of batts any metallic residue should be removed and 
you can continue with all colors without a problem.

All of our Drum Carders now come with a free copy of our DVD (Fancy 
Kitty: Drum Carding Basics) that visually explains the set up of your 
carder, various fiber preps that can be made with the carder, carding 

Содержание Kitten Drum Carder








Отзывы: