Fancom I-fan 35 Xtra, Руководство пользователя

Страница: 10 / 47

Gn
7
g
Before connecting, turn off the power and turn it back on only after the entire installation is ready.
The motor/thermal protection is already integrated in the I-fan.
Due to a higher inrush current it is possible that the current protection will be activated during power up.
The number of I-fans that can be connected to current protection depends on the type of protection.
Type B: 2 I-fans
Type C: 4 I-fans
Make sure that the I-fan is connected to protective earth according to the guidelines.
Keep signal and power cables as short as possible.
Place cables preferably in a duct (separate signal cables from power supply cables).
Connect the I-fan and manual control:
•
Connect the connection box (see page 8)
•
Connect the manual control "Operation box I-Fan analog with I/O-net" (see page 9)
•
Connect the manual control "Operation box I-Fan 4x analog" (see page 10)
•
Check the jumper settings at the MCA (see page 11)
•
Connect the manual control "Operation box Potentiometer" (see page 12)
•
Connect the power supply (see page 13)
•
Set the dipswitch settings (see page 14)