Fancom F41, Инструкция по эксплуатации

Страница: 34 / 51

Lumina 41/42 Clocks, external registration and alarms
30
Reg. input Setting the type of measurement:

MANUALLY : Enables you to enter the amount of today manually.

SLOW PULSE : Measuring instruments with a maximum frequency of 20 pulses
per second (20 Hz).

QUICK PULSE : Measuring instruments with a maximum frequency of 20 pulses
per second (20 Hz) (only use when there is a link with a switch clock).

CONTACT : As long as the sensor makes contact, the value will be added up
cumulatively. The amount is therefore determined by time the contact is HIGH .
Depending on the selected Registration Input the following settings will appear:
SLOW PULSE or QUICK PULSE
Amnt per pulse
Setting of the unit that corresponds to one pulse.
Amount today Readout of the unit measured today. Reset this value to start all registration from zero
again.
CONTACT
Display Setting how the unit is displayed:

AMOUNT : number 'units' per minute ( Amount per min. ).

TIME : the time the contact makes contact.
Amount per min. Setting of the number of 'units' measured per minute. This option is only available if
Display=AMOUNT .
Amount today Readout of the unit measured today. Reset this value to start all registration from zero
again.
Input status Readout of the actual input status. HIGH or LOW .