SELECTING A LOCATION:
Choose a location for mounting the fan where the blades will have
at least
2.1
metres of clearance from the floor.
Make sure that the installation site will not allow the rotating fan blades to come
into contact with any object and that there is a minimum clearance of 150mm (6”)
from the blade tip to the wall or ceiling. Please note that the bigger this clearance is
the better the airflow from your fan will be.
DO NOT use outdoors. Installing the fan in a position where it could be exposed to
water or moisture is dangerous. Refer to Warranty terms for Alfresco use.
If the location you have chosen does not have a suitable support beam capable of
supporting 45Kg, install a brace 2” x 4” between the ceiling joists as a support
medium.
ASSEMBLY:
Unlike most ceiling fans, the Fanco Eco Silent Ceiling Fan requires you to attach the
blades to the motor
BEFORE
mounting the motor to the ceiling.
If installing more than one ceiling fan, ensure that the blades do not get mixed up
between units, as each set is dynamically balanced.
BLADE ATTACHMENT:
1.
Remove the two screws from the covering plate on top of the motor housing, then
remove the Covering plate.
2.
Insert the blade through the slots around the motor. Align the blade with the three
holes, and secure the three screws through the opening exposed when the
covering plate was removed. If the holes do not align, the blade is upside down.
The blade is designed to fit snugly, the screws should be vertical with the blade.
3.
Tighten all blade screws evenly and securely to ensure quiet, wobble free
operation of the fan.
4.
Replace the covering plate on top of the motor housing by reversing step 1.
4
