INSTALLATION AND ASSEMBLY
CAUTION: Before installing the fan make sure you have turned OFF the electricity supply.
SELECTING A LOCATION:
1. Choose a location for mounting the fan where the blades will have at least 2.1 metres of clearance
from the floor.
2. Make sure that the installation site will not allow the rotating fan
blades to come into contact with any object and that there is a
minimum clearance of 150mm (6”) from the blade tip to the wall or
ceiling. Please note that the bigger this clearance is the better the
airflow from your fan will be.
3.
DO NOT
use outdoors. Installing the fan in a position where it
could be exposed to water or moisture is dangerous.
4. If the location you have chosen does not have a suitable support
beam capable of supporting
45Kg, install a brace 2” x 4” between
the ceiling joists as a support medium.
5. Secure the hanging bracket to the ceiling joist or suitable structure that is capable of carrying a load
of at least 45Kg, with the two long fixing screws provided. Ensure that at least 30mm of the screw is
threaded into the support.
NB: The fixing screws included are designed for use when ceiling fan is secured onto timber
joists. For all other surfaces, additional and suitable fixing screws for that surface will need to
be purchased.
ELECTRICAL CONNECTIONS
•
Ensure the power is off when installing this fan.
•
Connect the Live (L), Neutral (N) and Earth ( ) according to the markings on the Terminal Block.
For your convenience, and to assist in easy installation & cleaning, your ceiling fan is connected with
Fanco’s easy connect system. Simply connect the male and female couplings, and then ensure
excess wiring is retained inside the upper canopy.