LET’S BEGIN
ASSEMBLE & TURN IT ON
1. Tie or pin your hair away
from your face to avoid it
getting tangled in the device.
2. Select the brush head of
your choice and attach it to
the devices’ head by pushing
it firmly until you hear a click.
3. Dampen face (or body) and
brush head with water
(cleansing with a dry brush head
may cause skin irritation). Apply
preferred cleanser or body wash
to the skin.
4. To attach the extension handle
place the attachment cover over
the back of the device and slide
the handle into the connecting
piece, until you hear a click. To
remove the extension handle,
press the handle release button
and slide the two pieces apart in
one motion.
5. Turn ON device and select
suitable speed. Press the ON/
OFF switch ONCE for gentle
cleansing (LOW), TWICE for deep
cleansing (HIGH), and THREE
TIMES to turn the device off.
6. Gently massage your face or
body in circular motions with
the device for approximately 60
seconds.
Note:
Gently glide the brush
over the skin surface. Pressing
too hard will obstruct the
motion, reduce the effective-
ness and could cause irritation.
7. Press the power button three
times to turn off the device.
Rinse the brush head with
water and let air dry.
