FANATEC Porsche 911 Turbo S Wheel, Руководство для разработчиков

Страница: 7 / 9

6+1 Shifter:
If the 6+1 gear stick (7GS) is not working properly it might require new
calibration. Please go through the following steps:

Connect the power supply to the base

Enter any platform mode (PC/PS3/Xbox360)

Press „start button“ (STB) + „tuning button“ (TUB) at the same time
The LED display will show G_n

Bring the 7GS into neutral position

Press the „start button“
The display will now change to G_r

Enter reverse gear

Press the „start button“
The display will now change to G_1

Bring the 7GS into 1st gear

Press the „start button“
The display will now change to G_2

Bring the 7GS into 2nd gear

Press the „start button“
The display will now change to G_3

Bring the 7GS into 3rd gear

Press the „start button“
The display will now change to G_4

Bring the 7GS into 4th gear

Press the „start button“
The display will now change to G_5

Bring the 7GS into 5th gear

Press the „start button“
The display will now change to G_6

Bring the 7GS into 6th gear

Press the „start button“
Calibration is now complete!