FANATEC ClubSport Universal Hub For Xbox One, Руководство пользователя

Страница: 17 / 45

17
Note: The ClubSport Universal Hub for
Xbox One comes fully assembled out-
of-box. The following steps explain how
the assembly has to be done correctly in
case you want to change the number of
used button boxes or adjust their posi-
tions.
First you need to take off the frontplate of
the Universal Hub by loosening the four
bolts on the backside as described above.
Then choose the holes where you want to
mount a button box or the FunkySwitch
TM
.
Please note that the holes with gears must
be used for mounting of the rim! Put on the
button box lever or FunkySwitch
TM
lever
on the outside of the frontplate. Then use
the special bolt S1 (M5 x 11 mm) and put
it through the lever’s hole and then through
the chosen hole on the frontplate. Turn on a nut N1 (M5 x 7.8 mm x 4.7 mm)
onto the bolt thread from the inside of the frontplate. Adjust the lever position
according to your favour and to the used rim and then tighten the nut N1 on the
bolt S1. The position of the button box or FunkySwitch
TM
is fixed now.
Then connect the cable of the button box or the FunkySwitch
TM
to the specified
socket on the electronics. Please see further description about the sockets at
the end of this chapter as well as chapter 7 of this user manual.
S1
S1
N1
N1