Operation Guide
MODEL 5250 & 5200
Fan On & Power Off
Press to :
•
To Start fan
(this will open the lid and start the fan on high)
•
To turn the fan off
(this will stop the fan and close the lid)
Fan Speed
Press to increase the fan speed
Press to decrease the fan speed
The fan has
13 speeds. Not including ‘off’
Speed
Vent Lid Open / Close
(model 5250)
When the vent lid is closed, press this button once to open the vent lid.
When the vent lid is open, press this button once to close the lid.
This operates independent of Power On/Off.
Air Out/In
(model 5250)
When the vent lid is open, press this button once to reverse the fan blade
direction, press it again for the opposite direction.
Up
Down
In
Out
Vent Lid Open
(model 5200)
When the vent lid is closed, press this button once to open the vent lid.
Vent Lid Close
(model 5200)
When the vent lid is open, press this button once to close the vent lid.
Up
Down
Note: these are ‘hard wire’ RJ11 wall mounted controls
Model 5250
Model 5200
Operation Guide
MODEL 4200
Fan On 1-2-3
Press to start the fan. Each press increases the fan speed one level.
•
First press turns fan on and opens the dome at lowest level speed
•
Second press changes fan to level 2 speed
•
Third press changes fan to level 3 speed
•
Fourth press returns fan to level 1 speed
Fan Power Off
Press to :
•
To turn the fan off (this will stop the fan and close the lid)
Vent Lid Open
When the vent lid is closed, press this button once to open the vent lid.
This operates independent of Power On/Off.
Vent Lid Close
When the vent lid is closed, press this button once to close the lid
This operates independent of Power On/Off.
Up
Down
Note: this is a ‘hard wire’ RJ11 wall mounted control
Note: FOR WALL CONTROLLED FANS,
When the fan is running, closing the lid using the up/down button shuts the fan blade off.
Re-opening the lid using the up/down button will resume fan blade to previous set speed.
Using the On/Off button will not do this. The On/Off button resets fan to normal start.