Family Fun Companies Platinum heights, Руководство по эксплуатации

Страница: 14 / 38

Rev. 1.0
13
6.1.2 Test Method
Press the TEST button on the mainboard.
6.1.3 LED Display
BONUS: LED<1>1-4; Score: LED<3>1-3;
Coin: LED<4>1-2;
Bottom wheel LED 1~12: LED<7>, LED<8>.
6.1.4 Test Method (main board)
1) Press Test button once: to show if all LED display is normal < 1.2.3.4.5.6.7.8.>
2) Press Test button again: The LED will display “111” except for one to show the state
of DIP SWITCH states. There are 8 switches in a micro switch and each switch
represents a segment of the LED display. If the switch is at ON, the segment will light
up.
3) Press Test button again: The LED will display “222”. This mode will test the input
signal (1-40). When you send an input signal to the main board, the corresponding
input signal will show on the LED display.
4) Press Test button again: The LED will display “333”. No function is assigned.
5) Press Test button again: The LED will display “444”. It tests 40 inputs in J9, and
Output J22 to J26.
6) Press Test button again: The LED will display “555”. It shows lighting output.
6.1.5 Error Codes
The following error codes will display if the input signal is not in normal state when the game
is turned on (but continues to operate after the alarm sounds):
E01 Start/Stop button E06 I6 or motor
E02 Collect ticket button E07 I7 or motor
E03 Ticket mech reset E83 Coin mech1
E04 Service button E84 Coin mech2
E05 I5 or motor HLP No ticket or ticket mech error