Fametech BT-650-M, Руководство пользователя

Страница: 13 / 40

-11-
Establishing the Wireless Connection between Scanner
and Receiver (Recharge/Communication Cradle)
The paring between BT-650 scanner and the data receiver (Bluetooth 1.1
communication cradle) is pre-configured in factory. User can establish
communication automatically when the recharge/communication cradle is
installed to host PC and the scanner is activated.
1. Turn on the computer.
2. Connect the Cable to the data collector.
3. Connect the USB connector to the USB port on
the computer. The
Communication Status Indicator
flashes RED to indicate that the receiver is
functioning (device searching mode).
4. Press and keep hold the Scan Trigger for over 5 seconds to initiate the
link to the receiver. The LED indicator of the scanner may blink RED and
connect to the receiver
5. When the connection is properly
established, both the LED
Indicators of receiver
(recharge/communication cradle)
and scanner lit RED steadily and
the scanner is ready to use.
Recharge/Communicati
on Cradle
Connect to PC
(USB Port)
Host PC