25
2.
Enter controller edit mode
Press the [MIDI EDIT] button to enter the controller edit mode, the
relevant MIDI EDIT indicator will light up.
3.
Controller select
In the controller edit mode, press one of the [CTRL 1]-[CTRL 3]
buttons to individually edit the selected controller. For example,
press [CTRL 1] button to enter controller 1 edit, the relevant indicator
lights up, and the nixie tube displays command value, then you can
edit parameters of controller 1.
4.
Command Settings
In MIDI controller edit mode, press [COMMAND] button and the
nixie tube currently displays its corresponding command value, the
“VOICE”icon will light up. By this time, directly set the command
value by pressing the assigned key(s) in the MIDI section to the
desired function. There are total 131 MIDI control commands
(000-130), and the default value is:001.
Number
000~127
128
129
130
Display
0.00~1.27
.Cn
.dn
.En
Command
Standard MIDI control
（
Bn
）
Program change
（
Cn
）
Channel aftertouch
（
Dn
）
Pitch bend
（
En
）
What’s MIDI?
MIDI (short for Musical Instrument Digital Interface) allows a wide
variety of electronic musical instruments, computers and other related
devices to connect and communicate with one another. MIDI carries
event messages that specify notation, pitch and velocity, control signals
for parameters such as volume, vibrato, audio panning, and program
change information to change the voice selections.
MIDI Terminals
This instrument has been equipped with 3 MIDI terminals: 1 USB
terminal
,
1 MIDI IN terminal and 1 MIDI OUT terminal.
Terminal Rules
In MIDI terminals, we define those devices which control other devices
as “master device”, and the other controlled devices as “subordinate
device”. Connect the MIDI OUT terminal of master device to the MIDI
IN terminal of subordinate device. The MIDI terminals of the same
device cannot be connected. Similarly the same MIDI terminals of
different Devices cannot be connected.
MIDI Controller
This instrument has 3 independent MIDI controllers, which can be used
to control the MIDI device. Please refer to the detailed procedures as
below.
Controller Settings
1.
Enter MIDI controller mode
Press and hold [SHIFT] button, then press the [MIDI MODE] button
to enter the MIDI controller mode. The LED indicator of
[MIDI MODE] lights up.
MIDI Function
SAVE
REC
C
M
Y
CM
MY
CY
CMY
K
aw_SP5300_Manual_G03_170426.pdf 25 17/4/26 10:16
