FAME GSH2-200SA, Руководство пользователя

Страница: 4 / 10

4
Setting up the GSH2-200SA
WARNING!
To avoid electrical shock or any other damage, make sure that the
GSH2-200SA and all other devices are switched off before you start
connecting them to the amplifier!
Power Connections/Mains
Before connecting to a grounded power outlet,
make sure the power switches are in the off position
(facing down). The GSH2-200SA is set up for 230
V of line voltage. Once the amplifier is plugged
in, you can get started!
Connecting an electric guitar
The input jack on the right side of the frontpanel
receives your electric guitar signal by means of a
shielded guitar cord with 1/4” mono style plug.
Make sure the master volume of the amplifier is
set to the lowest position to avoid disturbing noise
while connecting.
Connecting speaker cabinets
The GSH2-200SA can only work with a connected
speaker cabinet and should never be used without
it. Make sure that you use a mono style 1/4“ speaker
cable for the connection. Due to the fact that
the GSH2-200SA is a stereo amplifier, you
will find two connection jacks for each power
amp sides. Always take care of the correct
impedance between the amplifier and the con-
nected cabinet. I.E. GSH2-200SA/4 ohms > ca-
binet/4 ohms.
Travelling Abroad
If travelling to countries outside the
EU, always check their local volta-
ge before operating the GSH2-200SA.
Mismatched voltages can and most li-
kely will destroy your amplifier. Should
you encounter voltages and frequencies
other than those indicated, a transformer
must be used between the power socket and the
GSH2-200SA. This transformer must be able to
transform the voltage and frequency to one of
the indicated settings.
Main Fuse
The main fuse is situated in a little drawer which is
part of the power input jack. This sliding fuse hol-
der also hides a spare fuse. For 230 V, the fuse
must be a 4A slow blow. It is crucially important
to use the specified fuse values only.
Maintenance
All checkups and repairs must be undertaken by
authorized service personnel. With the right treat-
ment, the electric circuit and the power amp will
not need any kind of maintenance at all.