Putting into operation:
All connections of the device should be made before switching on. Only use high-quality cables that
are as short as possible for the connections.
DEUTSCH
ENGLISH
Installation:
Be sure to inspect the product for damage before using it. Optimally, use the original packaging or
suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in
use.
1
BYPASS foot switch
Used to switch on/off the effects unit.
2
Status LED
Indicates the operating status of the effect unit.
3
rocker arm
Used to select normal or filter modes.
4
RANGE controller
Determines the frequency range of the Flanger effect.
5
COLOR controller
Determines the tonal coloration of the effect
6
Input
To connect the instrument (input jack for a standard instrument
cable {6.3mm mono jack})
7
Output
Connects the effects unit to an additional pedal or amplifier
(standard instrument cable).
8
DC IN connection
For connecting a power supply DC 9V (-) inside
9/10 rocker arm
Used to select the mode:
normal mode
For normal operation of the Flanger effect
filter mode
For a filter effect by frequency response within the Flanger effect
