FAME DIY-Kit ST-Style Скачать руководство пользователя страница 13

Adjusting the neck curvature 

The integrated truss rod offers the possibility to adjust the neck curvature with an Allen key. Access 
to the neck tension rod is located on the headstock behind the nut. The following applies here:  

When the neck tension rod is tightened (clockwise rotation), the neck tilts back and
becomes straighter.

When the neck tension rod is loosened (turn counterclockwise), the neck tilts forward and
becomes concave.

When adjusted optimally, all strings on the first frets should be playable without buzzing and without 
having too much distance to the fingerboard. Please note that adjustments should only be made in 
small steps (maximum quarter turns) and that the neck should be given a little time to adjust after 
each step. After each change, tune the strings to the correct pitch and examine the neck curve before 
making further adjustments to the truss rod.     

Adjust string action 

Depending on your playing habits, you can also adjust the string action by screwing the grub screws 
of the tremolo tailpiece higher or lower into the tailpiece. Loosen the string tension beforehand to 
make adjustments to the bridge easier. Again, a flatter string action is easier to play, but if it is too flat, 
it can cause noise when playing.  

Adjusting the intonation 

To adjust the intonation of the instrument precisely, each string saddle on the bridge has its own 
adjusting screw. To do this, use a tuner to compare the harmonics of the 12th fret (touch the string 
with the finger of the left hand above the 12th fret bar when striking it) with the pitch of the fretted 
12th fret and then adjust the difference. 

If the fretted note is 

higher

 than the harmonics note, the string length from the 12th fret to

the bridge is too 

short

. The string saddle must therefore be screwed further 

back

.

If the fretted note is 

lower

 than the harmonics note, the string length from the 12th fret to

the bridge is too 

long

. In this case, the string saddle must be screwed further 

forward

.

As soon as the instrument is tuned, the neck curve is adjusted, the string action is adapted to the 
respective playing style and all strings intonated correctly, you hold a completely playable electric 
guitar in your hands! 

 

ENGLISH 

Содержание DIY-Kit ST-Style
















Отзывы: