DEUTSCH
ENGLISH
Tabelle 1
Status
Power display (Red)
Bluetooth Display (Blue)
Power on
Lights up according to the
state of charge, Table 2
off
Bluetooth on
Flashes quickly
Bluetooth Play
Flashes slowly
Bluetooth Pause
Lights up continuously
Tabelle 2
Power adapter connected
Red and green LEDs light up
Charges
Red LED lights up
Load Volkommen
Green LED lights up
Connecting a guitar:
1. turn on the power switch, the LED will light up now
2. connect your guitar with a suitable guitar cable
Use the GUITAR Volume and MASTER Volume knobs to adjust the volume to the desired level.
Connecting a microphone:
1. connect your microphone to the MIC input of the AG-40A using a microphone cable with 6.3mm
stereo jack.
Use the MIC Volume and Master VOlume knobs to set the desired microphone volume.
3. adjust the ECHO controller as required
Connection of another AG-40A
1. only another AG-40A(Amp2) can be connected to the AMP OUT of an AG-40A (Amp1) via its
corresponding AMP IN via a 3.5mm stereo mini jack. The amplifi er (Amp2) connected in this way is
controlled by this AG-40A(Amp1), the Volume, EQ and
Effect settings of Amp1.
