background image

2

Congratulations!

We would like to thank you for purchasing the AC60R Acoustic Amplifi er. It has 
been designed and developed for the use with almost any acoustic instrument. 
Before using your new amplifi er, we advise to read the following pages carefully.

Taking care of your AC60R

Safety Warnings

We want you to be aware of certain safety aspects, 
for reasons of product safety and liability. With all 
due respect, please read the following before 
operating your new Fame amplifi er. 
•   Do not use or store your amplifi er in or near 
 

moist or wet areas.

•  Make sure that the voltage shown on the back of 
 the 

amplifi er is the correct voltage for the 

 

location you are using it. The AC60R can 

 

never be used at different voltages than shown.

•  Opening the amplifi er housing must only be 
  done by authorized personnel. No user
 

serviceable parts inside.

•  The power amp is confi gured to deliver 
 

highest tone at normal volume levels. We

 

suggest for your own good not to expose 

 

yourself to  very high volume levels for long 

 

periods of time. It can lead to hearing 

 damage.

Transporting the AC60R

•  The AC60R is a solid state instrument 
 amplifi er. The built-in circuits are sensitive to 
 

hits, especially when hot. To avoid damaging 

 

the unit, we recommend using care during 

 

setup and tear down of the unit.

•  Allow the amplifi er to adjust to the ambient 
  temperature before operating, 10 minutes 

 

 

should be suffi cient in all cases. Especially the 

 

change between a cold vehicle and, in most 

 

cases, warm stages can cause condensing

 

fl uid inside the electrical circuit. This can lead 

 

to circuit shorts.

•  For continued road use, please protect the 
 amplifi er with a professional fl ight case. Trans- 
 

port only in operating position. Do not trans-

 

port upside down or on its side.

Daily use

•   Never be rough with knobs, connections 
 

or other parts of the amplifi er. 

•   Be careful while pulling out cables. Pulling 
 

plugs out quickly can cause damage. 

•  Disconnect all cables before transporting 
 the 

unit.

•   Avoid physical shocks, such as hits or drops.
•   You should never put any heavy items on top
 

of the AC60R.

Cleaning the AC60R

•   Usually it is suffi cient to wipe down the outside 
 of 

the 

amplifi 

er with a slightly moist

 cleaning 

rag.

•   Do not use any abrasive cleaning chemicals.
•   Sometimes a vacuum cleaner can be used to 
 

remove dust and dirt from nooks and crevices.

•   Avoid putting any vinyl on top of the unit. 
 

It glues and discolours the surface.

Electric enviroment

•   This amplifi er contains electric circuits, which 
 

can cause interference when operating near 

 

Radio or TV units. If you notice any abnormal

 

noise, we recommend to put the amplifi er 

 

away from such devices.

•  Blown fuses can only be replaced with fuses 
 

of equal values. The use of incorrect fuses is 

 

prohibited and can cause severe injury or 

 

damage of the amplifi er.

•  Use only a grounded power cable in good
 condition.

Содержание AC60R












Отзывы: