Fame Audio Studio CU2, Руководство пользователя

Страница: 7 / 9

ENGLISH
Troubleshooting:
The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the
manufacturer, the dealer or the corresponding specialist personnel.
If the specified corrections have not led to success, please contact our service staff. The contact
details can be found at www.musicstore.de
Cleaning:
Regular cleaning of the device from dirt and dust increases the shelf life of the product. Always
disconnect the device from the power supply before cleaning it! Never clean the appliance wet! A
dry microfibre cloth is best.
Ventilation grilles and openings should always be cleaned of dust and dirt. Suitable compressed
air sprays are recommended for this application.
Envrionmental protection:
The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging
to a minimum. The use of environmentally friendly and recyclable materials is of fundamental
importance to us. Please dispose of and recycle the packaging components after use properly.
Symptom Troubleshooting
No tone
Check the USB cable for damage (cuts, extreme
kinks, etc.).
Check the wiring. Connectors must be fully
inserted and snap into place!
Arm the microphone in the DAW or activate direct
monitoring.
The microphone may need to be levelled. Refer to
the software manual of the DAW (Digital Audio
Workstation) in question.
Delayed tone
Change the buffer size in the DAW settings. The
lower the number, the lower the latency. (Note:
with a low buffer size, the machine requires higher
performance. Depending on the computer, this
can lead to higher performance losses).