Fame Audio Phantom Power PP-1, Инструкция по эксплуатации

Страница: 8 / 10

ENGLISH
Troubleshooting:
The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the
manufacturer, the dealer or the corresponding specialist personnel.
Note! (Adjustable characteristics)
When recording, pay attention to the adjustable characteristics and read the instructions
in the operating instructions.
The adjustable low-cut filter also leads to a different recording result, as sub-bass
frequencies are filtered out.
If the specified corrections have not led to success, please contact our service staff. The contact
details can be found at
www.musicstore.de
Cleaning:
Regular cleaning of the device from dirt and dust increases the shelf life of the product. Always
disconnect the device from the power supply before cleaning it! Never clean the appliance wet! A
dry microfibre cloth is best.
Ventilation grilles and openings should always be cleaned of dust and dirt. Suitable compressed
air sprays are recommended for this application.
Symptom Troubleshooting
No tone
Check the cable for damage (cuts, extreme kinks,
etc.) and replace if necessary.
Check the wiring. Connectors must be fully
inserted and snap into place!
Check if the 48V phantom power is switched on at
the console/interface.
Check the setting of the preamplifier on the
console/interface/etc.