Set up:
All connections of the device should be made before switching on. Only use high-quality and unda-
maged cables that are as short as possible for the connections.
•
Make sure that the passive speaker is switched off!
•
Please note that the voltage setting corresponds to the local mains voltage.
Connecting the speakers to the wrong power supply may cause damage!
•
Turn the Level controls all the way to the left.
•
Connect all relevant signal sources and make sure that they are switched on.
•
Always turn on the speaker as the last component.
•
Set the desired input and output levels and make sure that the Signal/Limit LED is not lit.
Configuration of the audio input/output connector (Speak
er Twist
4 pin):
DEUTSCH
ENGLISH
Содержание MT Series
Страница 31: ......