ENGLISH
Set up:
All connections of the device should be made before switching on. Only use high-quality and
undamaged cables that are as short as possible for the connections.
Make sure that the Everest 10 column system is switched off!
Please note that the voltage setting corresponds to the local mains voltage.
Turn the Master volume and Subwoofer volume controls
(7)
all the way to the left.
Connect all relevant signal sources and make sure that they are switched on.
Always turn on the speaker as the last component.
Set the desired input and output levels and make sure that the Signal/Limit LED is not
lit.
Configuration of the connections:
XLR: