Falltech 7083B Скачать руководство пользователя

Страница: 8 / 24

5.5.3 Pass Through and Slotted Pass Through Buckles:

See Figure 6 for instructions.

A and A1

Grasp each end of the fasteners.

B and B1

Turn the pass-through end of keeper sideways so it will pass into the keeper’s holder.

C and C1

Allow the pass-through end to turn back to its correct angle so it will not dislodge from the keeper.

D and D1

To check proper fit, a flat hand may pass under the strap, but cannot form a fist.

Ensure all loose ends are properly tucked into webbing keepers so any loose webbing will not get tangled in equipment.

Figure 6 - Pass Through and Slotted Pass Through Buckle Instructions

5.5.4 Quick Connect Buckles:

See Figure 7 for instructions.

Verification

indicator

Verification

window

PUSH

OPEN

Verification indicator (unlocked)

PUSH

OPEN

Verification

window

PUSH

LOCKE

Verification indicator (locked)

PUSH

LOCKE

Verification

window

PULL

VERIFY

LOCK

Verification indicator (locked)

PULL

VERIFY

LOCK

A and A1

Grasp the male end of the keeper and the receiver.

B and B1

Insert the male end into the receiver and push to ensure closure.

C and C1

Check the verification indicators to

ensure the male end is properly seated.

Ensure all loose ends are properly tucked into webbing keepers so any loose webbing will not get tangled in equipment.

Figure 7 - Quick Connect Buckle Instructions

5.5.5 Confirmation of Proper Fit:

Confirm torso length adjustment so the shoulder straps are not applying

unnecessary pressure on the shoulders. Worker should be able to move around freely without the harness

causing restriction in movement.

•

Chest strap is six inches below the throat

•

Torso length adjustment does not apply unnecessary pressure on the shoulders or allows leg straps

to sag

•

Dorsal D-ring is in between the shoulder blades

•

Leg straps tightened to allow no more than a flat hand to pass through

MFBH04 Rev A

121219

http://www.bestmaterials.com | 1-800-474-757

[email protected] |

http://www.bestmaterials.com | 1-800-474-7570

[email protected] | http://www.bestmaterials.com | 1-800-474-7570

http://www.bestmaterials.com | 1-800-474-757

[email protected] |

http://www.bestmaterials.com | 1-800-474-7570

[email protected] | http://www.bestmaterials.com | 1-800-474-7570

Distributed by Best Materials® LLC

Содержание 7083B

























Результаты поиска

Содержание 7083B

Отзывы:

Похожие инструкции для 7083B

Бренды по названию

Популярные бренды

Falltech 7083B, Руководство пользователя

Результаты поиска

Содержание 7083B

Отзывы:

Похожие инструкции для 7083B

Бренды по названию

Популярные бренды