P 7
Monitor
FALKON
Display
NOTE: Please keep all the packaging materials. You may use them to pack these items when you need to move the display.
IMPORTANT SAFETY PRECAUTIONS
1.
Please read all the instructions carefully before using this product.
2.
BE SURE TO unplug the power cord when cleaning LCD. Please use a wet soft cloth to wipe the screen.
If it is still not clean, please use special LCD detergent.
3.
DO NOT use accessories unauthorised by the manufacturer, otherwise they may be dangerous.
4.
When unplugging the power cord/ power adapter, disconnect holding the plug and do not pull the wire.
5.
Keep the display away from any forms of liquid and solvents. Never place the display on wet surface.
6.
Don’t press LCD surface with fingers, hard or sharp objects.
7.
The grooves and openings on the back and bottom of the shell are for ventilation purpose they are also
for guaranteeing the reliability of the elements and preventing them from overheating; in order to pre-
vent the vents from blocking; DO NOT place the display on bed, sofa, carpet or other similar surface; DO
NOT place the display near to or on heat radiator or heater; DO NOT place the display into embedded
device, unless it is provided with adequate ventilating equipment.
8.
Only the type of power source indicated on the nameplate applies to this display. lf you have any ques-
tion on the type of power source you use, please consult the dealer of the display.
9.
For safety, the display or the power adapter is equipped with three-pin plug power cord. The third pin
of this plug is for grounding, and only applicable to socket that is correctly grounded. In case that your
socket is not available for the plug, please contact electrician to replace the socket.
10. Since there is high voltage or other risks when the shell is opened or moved, please DO NOT repair the
display by yourself, but request qualified maintenance staff to carry out full maintenance.
11. In one of the following cases, please unplug the display or the power adapter and ask qualified staff
for maintenance.
a. The power cord or the plug is impaired or worn.
b. The display falls off ar the shell is damaged.
c. The display is obviously abnormal.
12. Please place the display in a cool, dry and well ventilated place.
13. Store the display in temperature shown in technical specifications, beyond which the display may be
damaged permanently.
PRODUCT DESCRIPTION
1.1 General
This display is a high-performance smart multi-frequency scanning display. lt adopts active-matrix TFT-LED
backlight liquid screen and is controlled with MCU digital technology.
1.2 Packing list
Pisase check the following items in the packing case befare installation:
•
One LCD display (including the base)
•
One VGA signal line
(Models W2202S, W2402S, W2702S, W3201S)
•
One HDMI signal line (
Model Q2702S)
•
One power adapter
(except model W3201S)
•
One User Manual
lf any items are missing, please contact with the dealer.
