![background image](http://html.mh-extra.com/html/falcon/professional-fx/professional-fx_users-manual-and-installation-instructions_539788025.webp)
21
Oven temperature getting hotter as the cooker gets older
If turning the temperature down using the oven control knob
has not worked, or has only worked for a short time, then you
may need a new thermostat. This should be fitted by a service
person.
Oven lights are not working
The bulb has probably burnt out. You can buy a replacement
bulb (which is not covered under the warranty) from a good
electrical shop.
Ask for a 40 W - 230 V halogen lamp (G9) (
).
Turn off the power at the circuit breaker.
Before removing the existing bulb, turn off the power supply
and make sure that the oven is cool. Open the oven door and
remove the oven shelves.
Remove the bulb cover by turning it a quarter turn, counter-
clockwise. It may be very stiff (
).
Pull the existing bulb to remove it. When handling the
replacement bulb, avoid touching the glass with your fingers,
as oils from your hands can cause premature failure. Push,
click in the replacement bulb.
Screw back the bulb cover. Turn on the circuit breaker and
check that the bulb now lights.
Fig. 7.1
Fig. 7.2
Содержание Professional + FX
