1. FEATURES & SPECIFICATIONS
.
Arm / Disarm
. Dual stage shock sensing
. Panic mode / Anti hijacking
. Valet mode
. Auto re-arming
. Ignition locking/Footbrake locking
. Remote door lock / unlock
. Remote boot release (if installed)
. Last door rearming
. Passive locking
. Interior light delay
. Car finder
. Override mode
. Silent arm/disarm
. Door lock/unlock pulse defaults
. Keyless entry
. Channel 3 output
. Automatic and manual anti-hijacking
2. TRANSMITTER BUTTONS:
3. FUNCTION
3.1 Key Function:
Button
Armed
Disarmed
Ignition On
PRESS BUTTON 1 ONCE
ARM
ARM
LOCK
PRESS BUTTON 2 ONCE
DISARM
DISARM
UNLOCK
PRESS BUTTON 1 OVER 3 sec.
PANIC
PANIC
PRESS BUTTON 3 OVER 3 sec.
BOOT RELEASE
BOOT RELEASE
BOOT RELEASE
PRESS BUTTON 4 ONCE
PANIC
PANIC
PRESS BUTTON 1+2
SILENT DISARM
SILENT ARM
ANTI-HIJACKING
PRESS BUTTON 3 then 1
CHANNEL 3
CHANNEL 3
CHANNEL 3
3.2 Remote Transmitter Code Learning
With the alarm disarmed, switch the ignition ON. Within 10 seconds press the valet switch 6 times, after 2
seconds, the siren will chirp for 2 seconds and then the system enters into the code learning mode. Within
another 10 seconds, press any button of the first transmitter, the siren will chirp for 1 seconds and lights flash
twice to confirm the code has been learned. Apply the same procedure within next 10 seconds for the second
transmitter. The system will leave the code learning mode after finishing learning the code for 2 transmitters.
If two transmitters are not programmed, the ignition is switched OFF or the time exceeds the 10-second
programming time, the system will leave the code learning mode.
3.3 ARM MODE:
With the alarm disarmed, press button (1) when the ignition is off, the siren will chirp once, lights flash once
and doors lock (if connected and depending on the default as 1 or 4 seconds), the LED flashes slowly, the
immobiliser turns on, and the system enters into the arm mode.
3.4 Silent Arm/Disarm
A. Press button (1) and (2) once simultaneously, the system will enter into the silent arm/disarm. The siren
will not chirp. If doors, bonnet or boot are not closed properly, the indicator lights will flash three times and
the LED will flash to indicate that doors, bonnet or boot are not closed properly. The triggers of the above three
sensors will be bypassed until they are closed properly.